AMARICAR ENGINEERING & SYSTEMS
 * Total Solution for All Your Industrial Needs *

Google

 
Web


 Amaricar

   Products       Principal profi      Product Catalog   
Consultants Approved          Client List 

TRAY DRYER
  • RANGE 12 TO 200 TRAYS CAPACITY
  • TRAY SIZE : 32" x 16" x 1 1/4"
  • HEATING : ELECTRICAL / STEAM OR THERMIC FLUID RADIATOR / OIL FIRED HOT AIR GENERATOR
  • UNIFORM & QUICK DRYING
  • MAXIMUM TEMP. UPTO 500°C
  • INSIDE M S / ALUMINIUM / SS 316 / 304 OR FRP LINED
  • HIGH EFFICIENCY AXIAL FLOW FAN DESIGN GIVES BETTER PERFORMANCE
  • DIGITAL TEMPERATURE INDICATOR CUM CONTROLLER GIVES ACCURATE TEMPERATURE CONTROL
 

TECHNICAL SPECIFICATIONS:

DETAILS AFBD-30 AFBD-60 AFBD-200
CAPACITY 50 TRAYS 100 TRAYS 200 TRAYS
NOS. OF FANS ONE TWO FOUR
NOS. OF MOTOR / HP ONE / 1 TWO / 1 FOUR / 1
HEATING LOAD (KW) 100°C / 150°C 6 / 9 12 / 18 24 / 36
NOS. OF DOORS ONE TWO TWO
NOS. OF RACK AND PLACEMENT OF RACK IN DRYER ONE TWO FOUR

OVER ALL

 L 1930 3950 3950

DIMENSIONS

 W 1100 1100 1950

MM (APPROX.)

 H 2100 2100 2100

SIZE OF TRAY

 32" x 16" x 1 1/4"

POWER SUPPLY

 AC 3 PHASE, 415 V, 50 Hz, 4 WIRE

AHD : AIR HEATER DRYER

 ATD THERMIC FLUID HEATER DRYER

AED :  ELECTRIC HEATER DRYER

 ASD STEM HEATER DRYER

 

GENERAL CONSTRUCTION:

The cabinet of the Dryer is made from MS angle frame of double wall construction. The structure is made out of 65 x 65 x 6 mm thick MS angle. Inside lining in SS 316 / SS 304 or Aluminium sheet or FRP is available at an option according to client's choice. Explosion safety door is available for special application Dryers.

HEATING:

Aero Therm® Indirect Fired Hot Air Generators have been proved most economical and cost effective with faster drying and increased production with our Dryers Our Three pass Hot Air Generators are fitted with our Fully Automatic Oil/Gas Burners. Liquid fuel can be LDO / HSD or Furnace Oil. Electrically Heated models are provided with bank of specially designed MS/SS Tube, MS Strip Heater with fins. Steam Heated or Thermic Fluid Heated models are fitted with High Efficiency Fine Tube type Heat Exchangers.

 AIR CIRCULATION:

High Efficiency Axial Flow Fans mounted at most appropriate places in the Dryer plays an important part in faster drying and provides uniform air circulation within the Dryer. Axial Flow Fans are mounted externally on Ball Bearing pedestals and each Fans is driven by independent 1 HP TEFC motor. Air Inlet and Exhaust outlet dampers are provided on the top roof of the Dryer.

INSULATION:

The cavity formed in between double wall is heavily insulated with Ceramic Fibers. Glass Wool on all the sides to prevent heat losses from the Dryer.

CONTROL PANEL:

Pre-wired control panel consists of Digital Temperature Indicator, Controller, Contactors Over Current Relays, Fuses, Indicating Lamps, Push Buttons Main Isolator Switch etc. 

 

Home | Enquiry